Details
1.3inch OLED, SPI/I2C interfaces, straight/vertical pinheader
Key Parameters
| Driver Chip | SH1106 |
|---|---|
| Interface | 3-wire SPI, 4-wire SPI, I2C |
| Resolution | 128*64 |
| Display Size | 1.3inch |
| Colors | Blue |
| Visible Angle | >160° |
| Dimension | 40.50mm*37.50mm |
| Operating Temp. (℃) | -30~70 |
| Storage Temp. (℃) | -30~80 |
Interface
| PIN NO. | SYMBOL | DESCRIPTION |
|---|---|---|
| 1 | VCC | Power positive (3.3~5V power input) |
| 2 | GND | Ground |
| 3 | NC | NC |
| 4 | DIN | Data input |
| 5 | CLK | Clock signal input |
| 6 | CS | Chip selection, low active |
| 7 | D/C | Command signal, low level for command, high level for data |
| 8 | RES | Reset signal, low active |
Hardware Config
| Mode/Interface | BS0/BS1 | DIN | SCK |
|---|---|---|---|
| 3-wire SPI | 1/0 | MOSI | SCLK |
| 4-wire SPI | 0/0 | ||
| I2C | 0/1 | SDA | SCL |
Ordering Info
The 1.3inch OLED provides 2 options for the onboard pinheader:
- 1.3inch OLED (A): curved/horizontal pinheader
- 1.3inch OLED (B): straight/vertical pinheader
Downloads
Development resources: demo codes, schematic, datasheets, etc.
Wiki:
www.waveshare.com/wiki/1.3inch_OLED_(B)
Photos
Dimension
Weight: 0.008 kg
Quick Overview
- 1.3inch OLED (B) x 1
