Details
Cubieboard, a RasPi-like development board, ARM cortex-A8, DDR3, HDMI, Ethernet, Nand Flash, USB, micro SD, SATA, IR

Overview
The Cubieboard is a RasPi-like development board, features a 1G ARM cortex-A8 processor. It's a credit-card sized computer which is capable of running Android, Ubuntu and other Linux distros.
What's On Board


- Processor
- Allwinner A10
- Features
- 1GB DDR3@480MHz
- HDMI 1080p Output
- 10/100M Ethernet
- 4Gb Nand Flash
- 2 USB Host
- 1 micro SD slot
- 1 SATA
- 1 IR
- Others
- 96-pin expansion pinheaders including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP...
- Running Android, Ubuntu and other Linux distros. Pre-loaded Android 4.0.
Processor Features
- CPU
- ARM Cortex-A8
- 32KB I-Cache
- 32KB D-Cache
- 256KB L2 Cache
- GPU
- ARM Mali-400
- Video
- UHD 2160P video decoding
- 3D video decoding
- Support various video decoding formats, including VP8, AVS, H. 264 MVC, VC-1, MPEG-1,2,4, etc
- H.264 HP video encoding up to 1080p @ 30 fps or dual-channel 720p @ 30 fps
- Display
- Multi-channel HD display
- Integrated HDMI 1.4
- YPbPr, CVBS, VGA
- Multiple LCD interfaces, including CPU, RGB, LVDS up to Full HD
- Memory
- 32-bit DDR2/DDR3 Memory capacity up to 16G bits
- SLC/MLC/TLC/DDR NAND
- 8 flash chips, 64-bit ECC
- Memory capacity up to 64GB
- Support NAND of 5xnm, 4xnm, 3xnm, 2xnm, etc
- Support NAND of Samsung, Toshiba, Hynix, etc
- Boot Devices
- NAND Flash
- SPI NOR Flash
- SD Card
- USB
Photos
What's on the DVK522

- Cubieboard/Cubieboard2 connector
- Cubieboard/Cubieboard2 expansion ports
- TVOUT interface: video CVBS output, for connecting display devices like TV
- VGA interface: video VGA output, for connecting monitor
- 7inch capacitive touch LCD RGB interface: for connecting capacitive touch LCD with RGB interface
- 7inch capacitive touch LCD LVDS interface: for connecting capacitive touch LCD with LVDS interface
- 7inch resistive touch LCD RGB interface: for connecting resistive touch LCD with RGB interface
- CAMERA interface: for connecting camera modules like OV7670
- ZIGBEE connector: for connecting ZigBee modules like Core2530, supports working with ZB501
- UART interface: easily connects to UART modules such as RS485 Board (3.3V), GPS module, etc.
- ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
- SPI0/I2C1 interface: easily connects to SPI or I2C modules such as MAG3110 Board, AT45DBXX Dataflash, etc.
- Arduino connector: for connecting compatible Arduino boards and/or Arduino shields
- UART interface (PL2303TA): connects to the UART0 of Cubieboard/Cubieboard2 for debugging
- USB interface: USB TO UART (PL2303TA)
- ICSP interface: Arduino ICSP
- 5V/3.3 V power input/output: usually used as power output, also common-grounding with other user board
- 12M crystal: for PL2303TA
- PL2303TA: onboard USB TO UART convertor
- RTC backup battery: 3.3V battery
- 32.768K crystal: for PCF8563
- PCF8563: onboard RTC chip
- Buzzer
- AD keys: 3 common Android keys
- User LEDs: 8 LEDs
- Power indicator
- TVOUT jumper
- CAMERA power selection jumper
- RTC jumper
- RTC power selection jumper
- ONE-WIRE, Buzzer, and AD Keys jumper
- Arduino Port selection jumper: easily controlling the Arduino connection
- User LEDs jumper
- Arduino AD selection jumper
- short the right: while connecting Arduino ADC shield
- short the left: while connecting Arduino I2C shield
- Arduino UART selection jumper
- short the right: while connecting Arduino UART shield
- short the left: while connecting Arduino microcontroller board
DVK522 Photos
Examples
Peripheral | Interface | Ubuntu | Debian |
---|---|---|---|
LED | I/O | Y | Y |
Buzzer | I/O | Y | Y |
AD keys | EVENT3 | Y | Y |
DS18B20 temperature sensor | ONE-WIRE | Y | Y |
RTC real time clock | RTC1 | Y | Y |
MAG3110 Board | I2C1 | Y | Y |
AT45DBXX DataFlash Board | SPI0 | Y | Y |
RS485 Board (3.3V) | UART3/UART4 | Y | Y |
UART GPS | UART3 | Y | Y |
CSI CAMERA (OV7670) | VIDEO1 | Y | Y |
USB CAMERA | VIDEO0 | Y | Y |
USB WIFI | WLAN0 | Y | Y |
Development Resources
Weight: 0.923 kg
Quick Overview
Package Contains
- Cubieboard x 1
- SATA Cable for Cubieboard x 1
- USB power cable x 1
- Power Adapter US Standard 5V 2A 5.5/2.1mm × 1
- Power Adapter Connector 5.5/2.1mm to 4.0/1.7mm x 1
- DVK522 x 1
- 7inch Capacitive Touch LCD (D) x 1
- AT45DBXX DataFlash Board x 1
- MAG3110 Board x 1
- DS18B20 x 1
- UART GPS x 1
- USB WIFI BL-150UM RTL8188 x 1
- USB Camera OV7670 x 1
- 4-pin 2-pin wires pack x 1
- USB type A plug to mini-B plug cable x 1
- Ethernet cable x 1
- 40-pin FFC 0.5 200mm (same sides contact) x 1
- 7inch LCD screws pack x 1