Overview

Open051C is an STM32 development board that features an STM32F051C8T6 device as the microcontroller. There are further expansions with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32F family.

What's On Board

1. STM32F051C8T6:the high performance STM32 MCU which features
   • Core: ARM Cortex-M0 32-bit RISC
   • Operating Frequency: 48MHz
   • Operating Voltage: 2-3.6V
   • Package: LQFP48
   • I/Os: 39
   • Memories: 64KB Flash, 8kB RAM
   • Communication Interfaces: 2 x SPI, 2 x USART, 2 x I2C, 1 x I2S
   • AD & DA converters: 1 x AD (12-bit, 1μs, shares 16 channels)
   • Debugging/Programming: supports SWD (serial wire debug) interfaces, supports IAP
2. AMS1117-3.3: 3.3V voltage regulator
3. Power switch
4. Power indicator
5. LEDs: for indicating I/O status
6. Reset button
7. User key: for I/O input and/or interact with running code
8. Joystick: for I/O input (five positions)
9. 32.768K crystal oscillator: used for internal RTC, also supports clock calibration
10. 8M crystal oscillator: enables the MCU run at 48M frequency by frequency multiplication
11. 8I/Os + DAC + ADC Interface: easily connects to keypad, motor, etc.
12. SPI1 / SPI2 interface
• easily connects to SPI peripherals such as FLASH (AT45DBxx), SD card, MP3, etc.
• convenient for connecting AD module, thanks to the SPI1 alternative AD function
13. I2C1 / I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), EEPROM (AT24Cxx), etc.
14. LCD interface: easily connects to the touch screen LCD
15. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
16. USART1 interface: easily connects to RS232, RS485, USB TO 232
17. USART2 interface: easily connects to RS232, RS485, USB TO 232
18. I2S / I2C1 interface: easily connects to I2S peripherals such as audio module, etc.
19. PS/2 interface: for connecting PS/2 keyboard/mouse.
20. 5V DC jack
21. 5V/3.3 V power input/output, usually used for power output, or common ground with other user board
22. MCU pins connector: all the MCU pins are accessible on expansion connectors for further expansion
23. SWD interface: for debugging/programming
24. Boot mode selection: for configuring the BOOT0 pins
25. LEDs jumper
    • short the jumper to connect the LEDs to I/Os used in example code
    • open the jumper to connect the LEDs to other custom pins via jumper wires
26. User key jumper
    • short the jumper to connect the user key to I/Os used in example code
    • open the jumper to connect the user key to other custom pins via jumper wires
27. Joystick jumper
    • short the jumper to connect the joystick to I/Os used in example code
    • open the jumper to connect the joystick to other custom pins via jumper wires
28. PS/2 interface jumper
    • short the jumper to connect the PS/2 interface to I/Os used in example code
    • open the jumper to connect the PS/2 interface to other custom pins via jumper wires
29. VBAT selection jumper
    • short the jumper to use system power supply
    • open the jumper to connect the VBAT to external power, such as battery

Photos

Open051C Development Board

Connecting to debugger

Connecting to various peripherals

Connecting to touch screen LCD

Connecting to UDA1380 Board

Connecting to RS232 Board

Connecting to RS485 Board

Connecting to USB UART Board

Connecting to Ethernet Board

Connecting to VS1003B MP3 Board

Connecting to NRF24L01 RF Board

Connecting to 8 Push Buttons

Connecting to 5 IO Keypad

Connecting to AD Keypad

Connecting to EEPROM Board

Multi I2C peripheral Module connected to the I2C bus

Connecting to DataFlash Board

Connecting to Micro SD Board

Connecting to any accessory board you need

Note:
The Open051C supports programming via STM32 UART bootloader, a USB TO UART accessory board is also provided in the package.
The Open051C does NOT integrate any debugging function, a debugger is required.
The Open051C Standard includes only ONE accessory board -- PL2303 USB UART Board (mini).

SWD Interfaces

The figure below shows the header pinouts of SWD interface

Figure 1. SWD Header Pinout

Development Resources

• Related software (KEIL etc.)
• Demo code (examples in C, μC/OS-II)
• Schematic (PDF)
• STM32 development documentations (Datasheet etc.)

Wiki: www.waveshare.com/wiki/Open051C