0.95inch RGB OLED, SPI interface, straight/vertical pinheader
Key Parameters
| Driver Chip |
SSD1331 |
| Interface |
SPI |
| Resolution |
96×64 |
| Display Size |
0.95inch |
| Colors |
65K colorful |
| Visible Angle |
>160° |
| Operating Temp. (℃) |
-20~70 |
| Storage Temp. (℃) |
-30~80 |
| Operating Voltage |
3.3V / 5V |
Interface
| PIN NO. | SYMBOL | DESCRIPTION |
| 1 |
VCC |
Power positive (3.3~5V power input) |
| 2 |
GND |
Ground |
| 3 |
NC |
NC |
| 4 |
DIN |
Data input |
| 5 |
CLK |
Clock signal input |
| 6 |
CS |
Chip selection, low active |
| 7 |
D/C |
Command signal, low level for command, high level for data |
| 8 |
RES |
Reset signal, low active |
Ordering Info
The 0.95inch RGB OLED provides 2 options for the onboard pinheader:
- 0.95inch RGB OLED (A): curved/horizontal pinheader
- 0.95inch RGB OLED (B): straight/vertical pinheader
Downloads
Development resources: demo codes, schematic, datasheets, etc.
Wiki:
www.waveshare.com/wiki/0.95inch_RGB_OLED_(B)
Photos
Dimension

Selection Guide
| Part Number | Color | Resolution | Display Size (mm×mm) | Interfaces | Driver | Dimension (mm×mm) | Pinheader |
| 0.95inch RGB OLED (A) |
65K colorful |
96×64 |
20.14×13.42 |
SPI(4-wire SPI) |
SSD1331 |
31.7×37.0 |
curved/horizontal |
| 0.95inch RGB OLED (B) |
65K colorful |
96×64 |
20.14×13.42 |
SPI(4-wire SPI) |
SSD1331 |
31.7×37.0 |
straight/vertical |
| 0.96inch OLED (A) |
1/4 yellow section, 3/4 blue section |
128×64 |
21.7×11.2 |
3-wire SPI, 4-wire SPI, I2C |
SSD1306 |
33.0×33.5 |
curved/horizontal |
| 0.96inch OLED (B) |
1/4 yellow section, 3/4 blue section |
128×64 |
21.7×11.2 |
3-wire SPI, 4-wire SPI, I2C |
SSD1306 |
33.0×33.5 |
straight/vertical |
| 1.3inch OLED (A) |
Blue |
128×64 |
29.42×14.7 |
3-wire SPI, 4-wire SPI, I2C |
SH1106 |
40.5×37.5 |
curved/horizontal |
| 1.3inch OLED (B) |
Blue |
128×64 |
29.42×14.7 |
3-wire SPI, 4-wire SPI, I2C |
SH1106 |
40.5×37.5 |
straight/vertical |